Electron EQ
Key Features
- Separate low and high boost and attenuation controls support broad, musical passive-EQ-style curve interactions.
- Variable low-frequency control spans 22 Hz to 300 Hz for dialing in weight or low-end contouring.
- High-frequency shaping reaches from 1 kHz to 16 kHz, with a bandwidth control to set the breadth of the tonal move.
- Parallel tube-overdrive drive control adds optional harmonic coloration and disengages at 0 dB to avoid unnecessary processing.
- Selectable stereo, mid, side, left, and right modes allow tonal moves to target a whole mix or a specific stereo component.
- 4x oversampling and a 3 kHz to 20 kHz low-pass filter extend the high-frequency and filtering workflow.
- Idle filters can be bypassed at 0 dB, while the plug-in retains its window size with a saved DAW project.
Description
Electron EQ is a Viator DSP tube-inspired equalizer for broad low-end and top-end shaping, with a parallel drive stage for adding harmonic color. Its separate boost and attenuation controls encourage the familiar passive-EQ workflow while retaining continuously variable frequency controls rather than fixed hardware-style selections.
The low section covers 22 Hz to 300 Hz and the high section reaches from 1 kHz to 16 kHz, with a bandwidth control for the two tonal sections. A low-pass filter, output trim, EQ bypass, and 4x oversampling round out the core mixing controls.
Drive can stay out of the signal path at 0 dB or be blended in for tube-style saturation, so Electron EQ can work as a clean broad shaper or a character processor. Stereo, mid, side, left, and right modes also make it practical for controlling width, focusing low-end cleanup away from the sides, or giving only part of a stereo source extra air.
This is not a modern node-based corrective EQ. It is better suited to musical boosts and cuts on vocals, bass, drums, synths, and mix buses where the interaction of boost, attenuation, and gentle coloration is part of the result.
Frequently Asked Questions
What kind of EQ is Electron EQ?
Electron EQ is a tube-inspired, passive-EQ-style effect rather than a visual node-based surgical equalizer. Its paired boost and attenuation controls are designed for broad tonal moves and characteristic curve interaction.
What does the Drive control do?
Drive feeds a modeled tube-overdrive circuit with parallel processing, letting you add harmonic color alongside the EQ moves. The developer states that the drive processing turns off when set to 0 dB.
Can Electron EQ process only the sides or the center of a mix?
Yes. The official post lists stereo, mid, side, left, and right processing modes, so it can target a full stereo source or an individual stereo component.
How is Electron EQ delivered?
Viator DSP hosts the exact Electron EQ v2.1.0 post on Patreon, where the macOS and Windows installer attachments are listed. The public page presents a free Patreon join flow before access to creator content.
